Photo-Controlled Macroscopic Self-Assembly Based on Photo-Switchable Hetero-Complementary Quadruple Hydrogen Bonds

A photo-switchable hetero-complementary quadruple H-bonding array, which consists of an azobenzene-derived ureidopyrimidinone (UPy) module ( Azo-UPy ) and a nonphotoactive diamidonaphthyridine (DAN) derivative ( Napy-1 ), is constructed based on a reversible photo-locking approach. Upon UV (390 nm)/Vis (460 nm) light irradiations, photo-switchable quadruple H-bonded dimerization between Azo-UPy and Napy-1 can be achieved with exhibiting 4.8×10⁴-fold differences in binding strength (ON/OFF ratios). Furthermore, smart polymeric gels with unique photo-controlled macroscopic self-assembly behavior can be fabricated by introducing such quadruple H-bonding array as photo-regulable noncovalent interfacial connections.     

Serum pharmacochemistry combined with multiple data processing approach to screen the bioactive components and their metabolites in Mutan Cortex by ultra‐performance liquid chromatography tandem mass spectrometry

Root cortex of Paeonia suffruticosa Andrews (Paeoniaceae), known as Moutan Cortex (MC), is known to have anti‐allergic and anti‐inflammatory properties. However, the constituents absorbed into blood after oral administration of MC remain unknown. A sensitive and rapid method by ultra‐high‐pressure liquid chromatography–electrospray ionization–quadrupole‐time‐of‐flight mass spectrometry (UPLC‐ESI‐Q‐TOF‐MS) technology and the MetaboLynx^TM software combined with multiple data processing approach (Mdpa) was established to investigate the absorbed constituents in rats after oral administration of MC, providing unique high‐throughput capabilities for drug metabolism study. A hyphenated electrospray ionization and quadrupole‐time‐of‐flight analyzer was used for the determination of accurate mass of the fragment ion in negative mode, with excellent MS mass accuracy and enhanced data acquisition. This rapid automated analysis method was successfully applied for screening and identification of the constituents absorbed and metabolized studies of MC after oral administration to rats. A total of 46 peaks were obtained from MC, 41 of which were tentatively characterized. In the VIP‐plot of orthogonal partial least‐squares discriminant analysis, 23 interesting ions in serum samples were extracted, and 16 parent components and seven metabolites were detected in vivo. The integrative serum pharmacochemistry technique, UPLC‐ESI‐Q‐TOF‐MS, and Mdpa method were successfully applied for rapid discovery of multiple components from MC. Copyright © 2013 John Wiley & Sons, Ltd.     

多共振热激活延迟荧光过程的理论研究

本工作借助第一性原理和动力学演化,系统地研究了四个叔丁基-咔唑及吩噻嗪取代的硼-氮化合物(BCz-BN、2PTZ-BN、Cz-PTZ-BN和2Cz-PTZ-BN)的多共振热激活延迟荧光的高效发光机制.结果表明上述分子T₁与T₂间的内转换速率远大于其它辐射与非辐射速率,同时T₂到S₁的反向系间窜越速率也高于T₁到S₁的反向系间窜越速率,因此其多共振热激活延迟荧光过程应遵循T₁→T₂→S₁→S₀的路径.进一步动力学演化表明,T₁与T₂之间的内转换主要发生在演化初期,随着时间的推移,能量逐渐由T₂向S₁转移,并最终在S₁完成荧光发射.上述研究揭示了多共振延迟荧光的微观本质,为未来设计及合成新的多共振热激活延迟荧光分子提供了理论依据.     

载体材料对单Pd三效催化剂性能及催化活性的影响

采用共沉淀法制备了耐高温高比表面的La₂O₃-Al₂O₃(LA)以及铈含量分别为15%、33%和47%的储氧材料CeO₂-ZrO₂-La₂O₃-Al₂O₃(CZLA)、CeO₂-ZrO₂-La₂O₃+La₂O₃-Al₂O₃(CZL+LA)和CeO₂-ZrO₂-La₂O₃(CZL)₄类载体材料,并用浸渍法制备了整体式Pd/LA、Pd/CZLA、Pd/CZL+LA和Pd/CZL汽油车尾气净化三效催化剂,考察了载体材料对单Pd三效催化剂的影响。采用低温N₂吸附-脱附、H₂-程序升温还原(H₂-TPR)以及X射线光电子能谱(XPS)对载体材料及催化剂进行了表征,并考察了催化剂的空燃比性能和三效催化性能。结果表明,CZLA有效地结合了铈基和铝基载体材料的优点,表现出了优异的织构性能、热稳定性及还原性能。老化前后,其负载的单Pd三效催化剂在低温还原率、表面元素含量及Pd的电子结合能等性能方面表现出了最小的差异。催化剂活性测试结果表明,Pd/CZLA的三效窗口明显较宽,且拥有最低的起燃温度,尤其经1000℃老化处理后,其催化活性最高,C₃H₈、NO_x和CO的起燃温度分别为370、257和223℃。可见,相较于其他3种载体材料,CZLA更适合于负载单Pd三效催化剂,从而满足更高标准的三效催化剂的性能要求。     

Persistent Dialkylsilanone Generated by Dehydrobromination of Dialkylbromosilanol

A persistent dialkylsilanone was synthesized by the dehydrobromination of a dialkylbromosilanol with tris(trimethylsilyl)silyl potassium in solution at ?80 °C: It was characterized by NMR and IR spectroscopy, and was tested in several reactions. In ²⁹Si NMR spectrum in [D₈]toluene, the signal due to the unsaturated silicon nuclei was observed at 128.7 ppm. Reactions of the dialkylsilanone with water and mesitonitrile oxide gave a silanediol and a [2+3] cycloadduct, respectively. The silanone remains intact in [D₈]toluene below ?80 °C for at least two days, while it undergoes unprecedented isomerization to give a siloxysilene by means of 1,3‐silyl migration at higher temperatures.     

低温燃料电池的纳米电催化材料:综述(英文)

Low temperature fuel cells are an attractive technology for transportation and residential applica‐tions due to their quick start up and shut down capabilities. This review analyzed the current status of nanocatalysts for proton exchange membrane fuel cells and alkaline membrane fuel cells. The preparation process influences the performance of the nanocatalyst. Several synthesis methods are covered for noble and non‐noble metal catalysts on various catalyst supports including carbon nanotubes, carbon nanofibers, nanowires, and graphenes. Ex situ and in situ characterization methods like scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy and fuel cell testing of the nanocatalysts on various supports for both proton exchange and alkaline membrane fuel cells are discussed. The accelerated durability estimate of the nanocat‐alysts, predicted by measuring changes in the electrochemically active surface area using a voltage cycling method, is considered one of the most reliable and valuable method for establishing durabil‐ity.     

载体表面酸碱性质对无碱水溶液中Au催化的甘油氧化反应产物选择性的调控作用

甘油(GL)是一种重要的生物平台分子,通过催化选择氧化反应将其转化为具有高附加值化学品是可持续发展化学化工的重要课题之一.以Au为催化剂的GL水相选择氧化反应可以生成甘油酸(GLA)、二羟基丙酮(DHA)、羟基丙二酸(TTA)、羟基乙酸(GCA)和乳酸(LA)等多种产物.通常,该反应需要碱(NaOH)存在时才能进行,产物往往以GLA为主(选择性40%-70%),副产物主要有GCA, TTA和草酸(OA).一般认为,可溶性碱(OH-)是通过夺取GL分子中羟基上的质子而诱发反应的.尽管在Au催化的反应体系中从未检测到有甘油醛(GLD)生成, GLD和/或DHA被认为是该反应的中间物种.本课题组前期工作表明,氧化物(TiO2, Al2O3, ZrO2, CuO等)负载的纳米Au催化剂能够在无碱(无外加OH-)水溶液中选择性催化GL氧化生成DHA(而不是GLA).因此, OH-的存在与否很可能会改变水溶液中Au催化剂上GL氧化反应的途径.本文试图回答当GL的水溶液中不存在NaOH时, Au催化剂载体的表面酸碱性质是否也会对GL氧化反应的选择性产生调控作用.我们选用Mg/Al比(x)不同的MgO-Al2O3样品为Au催化剂的载体,以尿素为沉淀剂,采用沉积沉淀法制备了相应的Au/MgO-Al2O3(x)催化剂样品.采用X射线衍射、电感耦合等离子体-原子发射光谱仪、透射电镜以及N2吸附-脱附等温线等对MgO-Al2O3(x)和/或Au/MgO-Al2O3样品的物相、元素组成、Au颗粒大小以及比表面积等进行了表征分析;采用NH3和CO2程序升温脱附(TPD)分别对MgO-Al2O3(x)载体表面的酸、碱性进行了测定. NH3-TPD和CO2-TPD结果表明,随着Mg/Al比x从0增加至4.8, MgO-Al2O3(x)的表面酸量从0.94降到0.20μmol/m2,而其表面碱量却从0.05剧增至0.80μmol/m2.因此,载体中MgO含量越多或Mg/Al比越大,其酸性越弱而碱性越强.在无碱水溶液中的催化反应结果表明, Au/MgO-Al2O3(x)上GL氧化反应的主要产物为DHA, GLA以及GCA等.随着x值(催化剂表面碱性)不断增大,产物DHA的选择性从约80%下降到10%左右,而GLA的选择性却从约4%增加至约50%.当载体为酸性最强的Al2O3(x =0)时,产物DHA的选择性为最高(80%).由此可见,载体表面的酸碱性质决定了无碱水溶液中Au催化剂上的GL氧化产物的分布. 此外,当保持Au粒子的尺寸基本不变(如3.1或6.6 nm左右),而改变载体的酸碱性质时, Au/MgO-Al2O3催化GL氧化反应的活性(TOF)可相差8-9倍.本文还通过改变Au/MgO-Al2O3样品焙烧温度,制备了表面酸碱性质相同而颗粒大小不同的三个Au/MgO-Al2O3(0.2)催化剂,考察了Au粒径对GL氧化反应选择性的影响.在这三个催化剂上, Au颗粒的平均尺寸分别为2.8,3.2和6.6 nm, GL氧化反应的产物选择性近乎相同(DHA和GLA的选择性分别为65%和15%左右),但平均尺寸为6.6 nm Au粒子的催化活性(TOF)是3.2 nm Au粒子的1.6倍,2.8 nm Au粒子的2.7倍.因此,本文建立了载体表面酸碱性质与无碱水溶液中GL氧化产物选择性之间的关系,通过改变载体表面酸碱性质实现了对无碱水溶液中Au催化剂上GL氧化反应选择性的调控.尽管载体酸碱性质和Au粒子尺寸都对Au/MgO-Al2O3催化剂的本征活性有重要影响,但载体酸碱性质的影响更显著.     

A Gallium‐Substituted Distibene and an Antimony‐Analogue Bicyclo[1.1.0]butane: Synthesis and Solid‐State Structures

RGa {R=HC[C(Me)N(2,6‐iPr₂C₆H₃)]₂} reacts with Sb(NMe₂)₃ with insertion into the Sb? N bond and elimination of RGa(NMe₂)₂ ( 2 ), yielding the Ga‐substituted distibene R(Me₂N)GaSb?SbGa(NMe₂)R ( 1 ). Thermolysis of 1 proceeded with elimination of RGa and 2 and subsequent formation of the bicyclo[1.1.0]butane analogue [R(Me₂N)Ga]₂Sb₄ ( 3 ).     

Reductive Insertion of Elemental Chalcogens into Boron–Boron Multiple Bonds

The syntheses of sulfur‐ and selenium‐bridged cyclic compounds containing boron stabilized by N‐heterocyclic carbenes (NHCs) have been achieved by the reductive insertion of elemental chalcogens into boron–boron multiple bonds. The three pairs of bonding electrons between the boron atoms in the triply bonded diboryne enabled six‐electron reduction reactions, resulting in the formation of [2.2.1]‐bicyclic systems wherein bridgehead boron atoms are spanned by three chalcogen bridges. A similar reaction using a diborene (boron–boron double bond) resulted in the reductive transfer of both pairs of bonding electrons to three sulfur atoms, yielding a NHC‐stabilized trisulfidodiborolane. The demonstration of these six‐ and four‐electron reductions lends support to the presence of three and two pairs of bonding electrons between the boron atoms of the diboryne and diborene, respectively, a fact that may be useful in future discussions on bond order.     

The Triboracyclopropenyl Dianion: The Lightest Possible Main‐Group‐Element Hückel π Aromatic

Hückel π aromaticity is typically a domain of carbon‐rich compounds. Only very few analogues with non‐carbon frameworks are currently known, all involving the heavier elements. The isolation of the triboracyclopropenyl dianion is presented, a boron‐based analogue of the cyclopropenyl cation, which belongs to the prototypical class of Hückel π aromatics. Reduction of Cl₂BNCy₂ by sodium metal produced [B₃(NCy₂)₃]^2?, which was isolated as its dimeric Na⁺ salt (Na₄[B₃(NCy₂)₃]₂?2 DME; 1 ) in 45 % yield and characterized by single‐crystal X‐ray diffraction. Cyclic voltammetry measurements established an extremely high oxidation potential for 1 (E_pc=?2.42 V), which was further confirmed by reactivity studies. The Hückel‐type π aromatic character of the [B₃(NCy₂)₃]^2? dianion was verified by various theoretical methods, which clearly indicated π aromaticity for the B₃ core of a similar magnitude to that in [C₃H₃]⁺ and benzene.